Epson printers will likely give you an Epson printer error code 0x97, and a problem with the hardware causes this error. This error usually occurs during printing time and causes your printer to stop printing.
An Epson printer error code indicates a problem with your printer. Ink cartridges or printheads are the most common causes. You may also experience a paper jam or issues with your computer software. To reset an Epson printer error code: Unplug the power cord at the back of your machine and wait 30 seconds. If this fails, you can clean out jammed paper and replace any ink cartridges. This blog post explains how to fix an Epson printer error code 0x97.
An Epson printer error code can be caused by a low ink level or an empty cartridge. Locate the printer cartridges first and then remove them from their cases. If the cartridges are not installed in the machine, press down on either the tabs or the tabs at the end to remove them from their slots. Take out all packaging material and flip the cartridge. To remove the cartridge from its black plastic base, press down on the tabs at each end.
After you’ve removed all cartridges
After you’ve taken out all the cartridges, switch your printer off and unplug it to ensure that no further attempts can be made without electricity being applied to the cartridges. The next step is to remove the Epson printer’s ink cartridge cover so you can expose your printer’s head. Covers are held with screws or clips on specific models; you should consult the owner’s manual to get more details on how to do this.
Solutions to Resolve Epson Printer Error Code 0x97:
These solutions will correct this error:
1. Unplug your Epson printer
Follow these steps to complete this procedure:
First, open the printer to verify that no jammed documents are present. You will need to remove any stuck files.
- Now, delete all cartridges from your printers.
- Unplug all USB cables and power cords from the printer.
- After unplugging the printer, you must press the power button.
- After a few seconds, connect all USB cables and power cords back to your printer.
- Get your Epson printer started now.
Check if the Epson Error code 0x97 persists. If it persists, you can try other solutions.
2 Unplug the printer and then plug it in in the opposite direction:
Follow these steps to complete this process:
- First, turn your printer off.
- Unplug all printer-connected cables.
- Hold the power button for at least one minute, and then press the power button again.
- Connect the cables to the printer once more.
- Hold the power button down for 60 seconds.
Check if the error still appears.
3 Using wet tissues for mechanical pad cleaning:
Follow these steps to complete this process:
- Turn off the printer and remove all wires (including the power cord) from the printer.
- Open the case to access the printer.
- Take a tissue and dip it in warm water.
- Now turn your printer’s head towards the middle.
- After this, place the tissue on the head of the mechanical pad.
- You must place the head in its original position for at least 10 minutes.
- After 10 minutes, cut the cloth and close the printer case.
- Turn your printer on now.
You can repeat this step up to three times to solve the Epson Error code 0x97
4) Download a patch for the fix:
Epson users can download an Epson 0x97 patch to fix the 0x97 bug. Follow these steps to download the patch.
- First, visit the official 0x97 patch site.
- The patch file is available for the 0x97 upgrade. The file containing the printer driver is 1 MB.
- After downloading, click on the scan button.
- Click on the patch to continue.
These processes will remove the Epson error code number 0x97 from your Epson device.
Also Read: Best Ways to Resolve Epson Printer is Printing Blank Paper Issue