Is your D-Link WiFi extender blinking red? If the answer to the question is yes, then this article will put an end to your trouble. Walk through the troubleshooting hacks discussed below and learn how to resolve the D-Link WiFi extender red light issue in a fraction of seconds.
Fixed: D-Link Extender Red Light Issue
-
Reboot Your D-Link Extender
Did you try rebooting your D-Link range extender? If not, then do it right now! Rebooting is one of the most effective solutions to get rid of the issues related to the D-Link WiFi extender.
Walk through the steps given below in order to give your D-Link range extender a fresh start:
-
Switch off your range extender.
-
Unplug it from the wall socket.
-
Let your range extender rest for some time.
-
Plug the range extender back into its respective wall outlet.
-
Switch on your D-Link wireless extender.
Once your D-Link device gets properly rebooted, check if you are still seeing the red light. If you are, walk through the next troubleshooting hack.
-
Check Internet Connection
Sometimes, a poor internet connection might force your D-Link range extender to blink red. So, check whether the internet connection is stable or not. To do so, try to access the D Link WiFi extender setup wizard on an updated web browser. If you fail to reach there, then consider strengthening the internet connection between your extender and the router.
It completely depends on the connection source you’ve used to connect WiFi devices. If you are using a wireless source, ensure that your devices are placed at a safe distance. It means neither too close nor too far. In case of a wired connection, ensure that the Ethernet cable being used is not worn out.
-
Relocate the Extender
The improper location of your D-Link WiFi extender might also be responsible for the red light issue. To get the problem fixed at hand, change the extender’s location. While placing your D-Link extender, make sure that it is not placed near corners, concrete walls, metal objects, or objects containing a large amount of water.
Also, do not place your D-Link wireless extender near cordless phones, microwave ovens, Bluetooth speakers, televisions, refrigerators, treadmills, or other devices emitting radio-waves frequencies. Consider not to place your WiFi extender in a congested space. Place it in a well-ventilated room instead.
-
Update the Firmware
Your D-Link extender’s functionality is controlled by a firmware. Chances are that your extender is operating on an outdated firmware version. Therefore, perform D Link firmware update before you find yourself in a no-win situation.
Here’s how to update your D-Link extender firmware by accessing dlinkap.local:
-
Ensure that your D-Link extender is properly connected to the router.
-
Now, get access to a PC and download the latest firmware file for your D-Link range extender.
-
Thereafter, access dlinkap.local on a new tab.
-
Log in to your D-Link wireless extender using the default admin details.
-
As soon as you see the extender’s web-based interface, click the Maintenance tab and select Firmware Upgrade from the dropdown menu.
-
Upload the firmware file after selecting it.
-
The D-Link extender will reboot as soon as the firmware installation gets finished.
-
Reset and Reconfigure
Did none of the aforementioned hacks work in your favor? No worries! It can happen if the D-Link extender is configured partially. Thus, you need to configure it properly. However, you need to reset your WiFi device before setting it up.
Here are the steps that will help you restore your D-Link extender to the factory default mode:
-
Disconnect your range extender from the existing router.
-
Now, start looking for the Reset button on your wireless extender.
-
Found? Good! Now grab a pin-like object.
-
Use the pin-like object to press and hold the Reset button.
-
Let the customized settings get erased from your D-Link extender.
-
Reconnect your D-Link WiFi extender to the router.
Now, set up your Wifi device from scratch either using the D Link app or by accessing dlinkap.local.
Sum Up
That’s all about what to do if your D-Link extender falls victim to the red light issue. Here’s to hope that the aforementioned tips will help you in getting the issue fixed in a hassle-free manner.
